Oil Recovery System
Performance Data
(Shredder Dust/ Waste Plastic/ Used Tire/ Styrene Foam)
Installation required area
* Range of manufacture max. 300tons/day.
* Required area does not include storage tank.
| Capacity (t/day) | 5 | 10 | 15 | 30 | 50 | 100 |
|---|---|---|---|---|---|---|
| Installation Area (Tsubo=3.3m2) | 60 | 100 | 130 | 200 | 270 | 400 |
Oil Recovery Rate
| Feedstock | Shredder Dust | Waste Plastic | Styrene Foam | Used Tire |
|---|---|---|---|---|
| Recover Rate | 55〜70％ | 55〜75％ | 85〜90％ | 40％前後 |
Analisys & Quality of Refined Oil
(*1) Caloric value is converted by each analytical value as 1cal=4.187J.
| Classification／Item | Dencity g/cm2 |
Flash Point ℃ |
Kinetic Velocity (50℃) mm2/s |
Pour Point ℃ |
Ash wt% |
Water wt% |
Sulfer wt% |
Nitrogen wt% |
Total Calorific Value (*1) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| J/g | cal/g | |||||||||
| Styrene Foam | 0.987 | 38.5 | 1.47 | <-50.0 | 0.011 | 0.033 | <0.01 | <0.01 | 40,040 | 9,563 |
| Disused Car Used Household Appliance Shredder Dust |
0.8650 | 23.0 | 1.86 | <-30.0 | <0.010 | 0.059 | 0.07 | 1.03 | 42.700 | 10,198 |
| Used Tire | 0.9420 | 70.0 | 3.74 | <-30.0 | <0.010 | 0.036 | 1.00 | 0.32 | 41.650 | 9,948 |
Capacity
*Possible manufacture for 100 - 200ton/day.
| Classfication／Model | SD-1500C | SD-1750C | SD-2000C | SD-2250C | SD-2500C | SD-3000C |
|---|---|---|---|---|---|---|
| Styrene Foam （Apparent Specific Gravity 0.5） |
175kg/h | 240kg/h | 300kg/h | 400kg/h | 500kg/h | 700kg/h |
| Disused Car Used Household Appliance Shredder Dust （ASG 0.5） |
175kg/h | 240kg/h | 300kg/h | 400kg/h | 500kg/h | 700kg/h |
| Waste Plastic （ASG 0.2） |
70kg/h | 100kg/h | 130kg/h | 160kg/h | 200kg/h | 280kg/h |
| Used Tire （ASG 0.7） |
245kg/h | 340kg/h | 440kg/h | 560kg/h | 700kg/h | 900kg/h |
Performance Data
( Waste Oil/ Crude Oily Sludge/ Extra High Viscosity Crude Oil)
Installation Required Area
* Max capacity manufactured: 300tons/day.
* Required area does not include any storage tank for crude or refind oil.
| Capacity (t/day) | 5 | 10 | 15 | 30 | 50 | 100 |
|---|---|---|---|---|---|---|
| Required Area (Tsubo=3.3m2) | 40 | 60 | 80 | 110 | 150 | 250 |
Analysis & Quality of Refined Oil
(*1) Caloric value is converted by each analytical value as 1cal=4.187J.
| Classification ／Item |
Dencity g/cm2 |
Flash Point ℃ |
Kinetic Velocity (50℃) mm2/s |
Pour Point ℃ |
Ash wt% |
Water wt% |
Sulfur wt% |
Nitrogen wt% |
Total Calorific Value (*1) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| J/g | cal/g | |||||||||
| Waste Lubrication Oil |
0.8487 | 60 | 4.47 | -17.5 | <0.010 | 0.04 | 0.41 | 0.05 | 45,110 | 10,774 |
Capacity
* Max capacity to be manufactured: 100-200tons/day.
* Capacity is only for waste oil.
| Classfication／Model | SD-1500C | SD-1750C | SD-2000C | SD-2250C | SD-2500C | SD-3000C |
|---|---|---|---|---|---|---|
| Waste Oil （Apprent Specific Gravity 1.0） |
650kg/h | 950kg/h | 1200kg/h | 1600kg/h | 2000kg/h | 2600kg/h |
