Traditionally it was considered natural or unavoidable that hazardous smell and a lot of waste bring forth in treatment of industrial wastes. In addition, a huge investment for installation was needed to cope with those problem. In this very aspect, Okadora exploded the established theory, and launched a full treatment system for industrial wastes without waste water and hazardous smell, as free from pollution.
In the same way, a rate of water content in the wastes will also vary from 99% (solid 99: water 1) to 50% (solid 50 : water 50), and comes to a big variation from day to day.
Okadora Full-Treatment System for industrial wastes can be met to any conditions of industrial wastes.
A traditional system has to run through a number of initial procedures in the processing. First of all, foreign objects may have to be removed by screening and solid particles separated by centrifuge; then there is condensing, evaporating, and finally drying or burning. On the contrary, with the Okadora system, there are no preliminary procedures. The industrial waste is collected by vacuum vehicles and then loaded directly into the Okadora Cyclone Dryer, where the waste is converted into solids. That’s all. And the ingenuity of the system means that the apparatus can be greatly simplified. This means that when it comes to comparing costs, there is a huge difference between an Okadora system and a traditional one, especially regarding construction costs, maintenance costs, and difficulty of operation.
Flow Chart → Cyclone Dryer Super Heat Dryer